Displaying General Rip Information - HP ProCurve 2910al Switch Manual

IP Routing Features
Configuring RIP
Figure 3-7.Example of General RIP Information Listing
3-34
RIP Information Type
Redistribute Information
Restrict Information

Displaying General RIP Information

To display general RIP information, enter show ip rip at any context level. The
resulting display will appear similar to the following:
The display is a summary of Global RIP information, information about
interfaces with RIP enabled, and information about RIP peers. The following
fields are displayed:
RIP protocol – Status of the RIP protocol on the router. RIP must be
■
enabled here and on the VLAN interface for RIP to be active. The default
is disabled.
■ Auto-summary – Status of Auto-summary for all interfaces running RIP.
If auto-summary is enabled, then subnets will be summarized to a class
network when advertising outside of the given network.
Page
3-39
3-39