Displaying The Hop Count Setting - HP ProCurve 2910al Switch Manual

Displaying the Hop Count Setting

To verify the current setting for increasing the hop count in DHCP requests,
enter the show dhcp-relay command. Note that the current setting is displayed
next to DHCP Request Hop Count Increment.
ProCurve# show dhcp-relay
Status and Counters - DHCP Relay Agent
DHCP Relay Agent Enabled
DHCP Request Hop Count Increment: Disabled
Option 82 Handle Policy
Remote ID
Client Requests
Valid Dropped
-------- ---------
1425 2
Figure 3-18. Example of show dhcp-relay Command Showing Hop Count
Increment
: Yes
: Replace
: MAC Address
Server Responses
Valid Dropped
-------- ---------
1425 0
IP Routing Features
Configuring DHCP Relay
3-47