HP ProCurve 2910al Switch Manual page 77

Syntax: [no] ip route < dest-ip-addr >/< mask-length >
Allows the addition and deletion of static routing table entries.
A route entry is identified by a destination (IP address/Mask
Length) and next-hop pair. The next-hop can be either a
gateway IP address, a VLAN, or the keyword "reject" or "black­
hole".
A gateway IP address does not have to be directly reachable
on one of the local subnets. If the gateway address is not
directly reachable, the route is added to the routing table as
soon as a route to the gateway address is learned.
dest-ip-addr >/ The route destination and network mask
< mask-bits
next-hop-ip-
addr
reject
blackhole
distance
The no form of the command deletes the specified route for the specified
<next-hop-ip-addr | vlan <vlan-id> | reject | blackhole >
[metric < metric>] [ distance<1-255> ] [tag-value <tagval>]
length for the destination IP address.
Alternatively, you can enter the mask itself.
For example, you can enter either 10.0.0.0/24 or
10.0.0.0 255.255.255.0 for a route destination of
10.0.0.0 255.255.255.0.
This IP address is the gateway for reaching the
destination. The next-hop IP address is not
required to be directly reachable on a local
subnet. (If the next-hop IP address is not
directly reachable, the route will be added to
the routing table as soon as a route to this
address is learned.)
Specifies a null route where IP traffic for the
specified destination is discarded and an
ICMP error notification is returned to the
sender.
Specifies a null route where IP traffic for the
specified destination is discarded and no
ICMP error notification is returned to the
sender.
Specifies the administrative distance to asso­
ciate with a static route. If not specified, this
value is set to a default of 1. For more on this
topic, refer to "Administrative Distance" on
page 3-7. (Range: 1 - 255)
IP Routing Features
Configuring Static IP Routes
3-25