What's New In This Version; New Features And Improvements; Software Release Notes; Software Download - Cisco TelePresence System C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction Introduction

What's new in this version

This section provides an overview of the new and changed
advanced settings and new features in the TC4.2 software
version.

Software release notes

For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC4).
Go to:
http://www.cisco.com/en/US/products/ps11422/
tsd_products_support_series_home.html

Software download

For software download go to:
http://www.cisco.com/cisco/
software/navigator.html?a=a&i=rpm
D14637.06 Profile C20 and Quick Set C20 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings

New features and improvements

New software release for Cisco TelePresence PrecisionHD
Camera
With the TC4.2.0 release, the PrecisionHD 1080p camera
will automatically be upgraded to camera software release
ID40069. Included in this release is:
• Improvements to auto focus.
• Improvement to hot pixel correction.
• Improvements with the automatic white balance.
New features accessible from Touch panel
• Support for MultiWay conference.
• Support for restart of the codec.
• Support for factory defaulting the system.
• Support for camera presets for cameras with pan,
tilt and zoom functionality.
• Support for putting someone on hold.
• Support for call transfer.
• Support for standby.
New features accessible from menu on screen
Virtual keyboard for the remote control.
New web interface
• The web interface has been redesigned.
• Recommended browsers are IE8 and Firefox.
New feature on Codec C20
When setting the Video OSD Mode to disabled, the C20 can
use the additional resources usually used by the GUI to do
1080p30 at the same time as sharing a presentation. In this
case the C20 must be controlled by a Cisco TelePresence
Touch or an external control panel as the GUI will be disabled.
7
Password protection Appendices
Support for CEC (Consumer Electronics Control)
The HDMI outputs now supports Consumer Electronics Control
(CEC). When set to On (default is Off), and the monitor
connected to the HDMI output is CEC compatible and CEC
is configured, the system will use CEC to set the monitor
in standby when the system enters standby. Likewise the
system will wake up the monitor when the system wakes
up from standby. Note that the different manufacturers uses
different marketing names for CEC: Anynet+ (Samsung);
Aquos Link (Sharp); BRAVIA Sync (Sony); HDMI-CEC (Hitachi);
Kuro Link (Pioneer); CE-Link and Regza Link (Toshiba); RIHD
(Remote Interactive over HDMI) (Onkyo); SimpLink (LG <http://
en.wikipedia.org/wiki/LG_Electronics> ); HDAVI Control,
EZ-Sync, VIERA Link (Panasonic); EasyLink (Philips); and
NetCommand for HDMI (Mitsubishi).
Support for always unmute when not in conference
The codec can be configured to allow muting of audio only
when the device is in a call. This is useful when an external
telephone service/audio system is connected via the codec
and you want it to be available when the codec is not in a call.
See the Audio Microphones Mute Enabled setting. When set
to InCallOnly this will prevent the audio-system from being
muted by mistake. When set to True, muting of audio is always
available.
Support for VCS clustering
The system can now retrieve a list of SIP registrars and/
or H.323 gatekeepers by configuring the unit with the fully
qualified domain name of the registrar/gatekeeper. Both NAPTR
and SRV records are supported in addition to A-records
using DNS. This will allow the unit to retrieve a list of up to 20
registrars/gatekeepers and try to register to them in order.
If the first one is full, unavailable or does not answer the
registration request, the unit will try to register to the next one
in the list until a successful registration is made.
Administrator guide
Contact us
www.cisco.com