Cisco TelePresence System C20 Administrator's Manual page 75

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Quick Set C20 — Cable
configuration
The illustration shows you the basic setup when connecting
the monitor, PC, PrecisionHD 1080p 4X camera, microphone,
loudspeakers (if applicable), LAN and line voltage to the Codec
C20.
NOTE: The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD 1080p 4X camera (the
PrecisionHD 1080p 4X* camera). For cable configurations of the
interim PrecisionHD 1080p 4X* camera, see next page.
CAUTION: In order to be able to use the system for video calls,
all orange colored sockets must be connected.
The codec must be switched off and disconnected from
!
the line voltage whenever connecting or disconnecting
other equipment.
D14637.06 Profile C20 and Quick Set C20 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings
75
Password protection Appendices Appendices
HDMI
Administrator guide
Contact us
HDMI
www.cisco.com