Making A Call From The Web Interface - Cisco TelePresence System C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Making a call from the web
interface
Sometimes, e.g. when you are configuring the system from a
remote location, it is convenient to be able to make calls from
the video system to ensure everything works as expected.
Making a call
Input field: Enter one or more characters in the input field until
the name you want to call appears in the dynamic search list
or, enter the complete name or number.
Dial: Press Dial to initiate the call.
Disconnect all: Press Disconnect all to end all calls.
Options: Click Options to change the bit rate for this call.
Select the bit rate you want in the Call rate
The call status page
You will find the following information on the call status page
when you are in a call:
• Remote number
• Call direction: Incoming/Outgoing
• Call protocol: H323/SIP
• Transmit and receive call rate
• Encryption
• Audio: Transmit and receive protocols
• Video: Transmit protocol and resolution, and receive
protocol and resolution
• Presentation: Transmit protocol and resolution, and receive
protocol and resolution
D14637.06 Profile C20 and Quick Set C20 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface Web interface
drop down list.
Conference Control
Call
Advanced settings Password protection
21
Administrator guide
Appendices Contact us
www.cisco.com