The Rtp Settings - Cisco TelePresence System C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Provisioning ExternalManager Address
Enter the IP Address to the External Manager/Management system. If an External Manager address
and a path is configured, the system will post an HTTP message to this address when starting
up. When receiving this HTTP posting the External Manager (typically a management system)
can return configurations/commands to the unit as a result. If the DHCP Option 242 is returned in
the DHCP response from the DHCP server the system will interpret this as the External Manager
address to use.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: Only the valid IP address format is accepted. An IP address that contains letters
(192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected.
Example: Provisioning ExternalManager Address: ""
Provisioning ExternalManager Protocol
Determine whether or not to use secure management.
Requires user role: ADMIN
Value space: <HTTP/HTTPS>
HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the
xConfiguration NetworkServices HTTP Mode setting.
HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the
xConfiguration NetworkServices HTTPS Mode setting.
Example: Provisioning ExternalManager Protocol: HTTP
Provisioning ExternalManager Path
Set the path to the External Manager/Management system. If an External Manager address and a
path is configured, the system will post an HTTP message to this address when starting up. When
receiving this HTTP posting the External Manager (typically a management system) can return
configurations/commands to the unit as a result. If the DHCP Option 242 is returned in the DHCP
response from the DHCP server the system will interpret this as the External Manager address to
use.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: Provisioning ExternalManager Path: "tms/public/external/
management/SystemManagementService.asmx"
Provisioning ExternalManager Domain
Enter the SIP domain for the provisioning server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Provisioning ExternalManager Domain: "any.domain.com"
D14637.06 Profile C20 and Quick Set C20 Administrator Guide TC4.2, July 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings

The RTP settings

RTP Ports Range Start
Specify the first port in the range of RTP ports. See also the "H323 Profile [1..1] PortAllocation"
command.
Requires user role: USER
Value space: <1024..65502>
Example: RTP Ports Range Start: 2326
RTP Ports Range Stop
Specify the last RTP port in the range. See also the "H323 Profile [1..1] PortAllocation" command.
Requires user role: USER
Value space: <1056..65535>
Example: RTP Ports Range Stop: 2486
48
Password protection
Range: Select a value from 1024 to 65502.
Range: Select a value from 1056 to 65535.
Administrator guide
Appendices Contact us
www.cisco.com