Arctic Cat Prowler HDX Service Manual page 73

2. Remove the reverse idler assembly (B). Account for and
note the location of the inner bushing (1), idler shaft (2),
and outer washer (3).
3. Remove the driveshaft (C); then pull the shift fork locat-
ing shaft (D) out of the crankcase locating boss and
allow the shift forks to disengage from the gear shift
shaft (F).
70
FI659A
4. Remove the gear shift shaft (F) noting the inner and
outer washers.
FI661A
5. Remove the countershaft assembly (E) along with
the shift fork assembly.
FI641A
6. Remove the crank balancer driven gear (G) and
account for a key; then remove the crankshaft bal-
ancer shaft.
FI646
FI653A
FI650A
FI662