Arctic Cat Prowler HDX Service Manual page 106

 NOTE: Account for and inspect the clutch housing
seal.
9. Remove the nut (left-hand threads) securing the clutch
shoe assembly (C).
10. Remove the cap screw securing the oil pump drive
gear (B). Account for a cap screw, washer, pin, and
spacer.
CF085
CC596
CF088A
11. Using an impact wrench, remove the cap screws
securing the final drive carrier bearing housing (E);
then remove the housing and account for two align-
ment pins.
PR410A
CC606
CD987
CD993
103