Available Saw Blades - Metabo KGS 303 Operating Instructions Manual

Maximum workpiece cross section
Standard cross cuts
width / height
Mitre cuts (rotating table 45°)
width / height
Bevel cutss (track arm holder 45° left)
width / height
Compound mitre cuts (rotating table 45° / track arm holder 48° left)
width / height
Weight
Machine in packing
Machine ready to work
Permissible ambient temperature for operation
Permissible temperature for transport and storage
Noise emission according to EN ISO 3744
Sound power level L
WA
sound pressure level at operator ear L
Effective value of weighted acceleration
(vibration at handle)
Dust collector (not included in standard delivery)
Suction port diameter
Minimum air volume flow
Minimum vacuum at suction port
Minimum air speed at suction port
*This machine is specially designed for the high momentary loads of crosscutting. The motor reaches the stated power of
1800 watts at S6 20% 5 min. (intermittent periodic duty-type with starting). This means that this saw can be operated for 1 minute at
full-load rating (1800 watts) within a 5 minute operating period. The motor has to deliver these 1800 watts only under extreme load
conditions during normal crosscutting it is subjected to much lower loads. With lower loads the duty cycle of the motor increases
substancially. Thus, when used as specified, because of its high reserve capacity, overheating or overloading of the motor is not
possible.

15.1 Available saw blades

Diameter
250 mm
250 mm
250 mm
250 mm
PA
Arbor bore Tooth rake
30 mm 5° neg.
30 mm 5° neg.
30 mm 5° neg.
30 mm 6° neg.
mm 285 / 81
mm 200 / 81
mm 285 / 50
mm 200 / 45
kg 23
kg 19,5
° C 0 to + 40
° C 0 to + 40
dB (A) 118
dB (A) 104
2
m/s < 2.5
mm 43.5
3
m /h 550
Pa 740
m/s 20
No. of teeth
24
alternate top bevel non-lamintated
teeth particle board
48
alternate top bevel
teeth
60
alternate top bevel
teeth thick-walled plas-
tic extrusions
80
trapezoidal-flat
teeth Cable ducting,
NF profiles,
high-quality
veneered sheets,
ENGLISH
285 / 81
200 / 81
285 / 50
200 / 45
23
19,5
0 to + 40
0 to + 40
118
104
< 2.5
43.5
550
740
20
Used for Stock-no.
wood, 091 003 0973
wood, 091 003 1058
panels
wood, 091 003 0981
panels
wood, 091 003 1040
panels
laminates
27