Table of Contents
Advertisement
Quick Links
KGSV 72 Xact
KGSV 72 Xact SYM
de Originalbetriebsanleitung 5
en Original Instructions 13
fr
Notice originale 20
nl
Originele gebruikershandleiding 27
it
Istruzioni per l'uso originali 34
es Manual original 41
pt
Manual de instruções original 49
sv Originalbruksanvisning 57
www.metabo.com
fi
Alkuperäisen käyttöohjeen käännös 64
no Original bruksanvisning 71
da Original brugsanvisning 78
pl
Oryginalna instrukcja obsługi 85
el
Πρωτότυπο οδηγιών λειτουργίας 93
hu Eredeti használati utasítás 101
ru
Оригинальное руководство по эксплуатации 108
Advertisement
Table of Contents
Related Manuals for Metabo KGSV 72 Xact
Summary of Contents for Metabo KGSV 72 Xact
- Page 1 KGSV 72 Xact KGSV 72 Xact SYM de Originalbetriebsanleitung 5 Alkuperäisen käyttöohjeen käännös 64 en Original Instructions 13 no Original bruksanvisning 71 Notice originale 20 da Original brugsanvisning 78 Originele gebruikershandleiding 27 Oryginalna instrukcja obsługi 85 Istruzioni per l'uso originali 34 Πρωτότυπο...
- Page 2 28 Sägegriff 29 Sicherheits-Verriegelung 30 verschiebbare Werkstückanschläge (incl. Aufsatz) 31 Feststellschraube der Werkstückanschläge 32 Feststellhebel (nur KGSV 72 Xact SYM) 33 Sperrklinken (nur KGSV 72 Xact SYM) 34 verstellbarer Winkel (dt. Schmiege) 35 Werkstückspannvorrichtung: hintere Bohrung 36 Werkstückspannvorrichtung: vordere Bohrung...
- Page 3 45° 45° 47° 47° 13 12...
- Page 4 305 mm x 72 mm 260 mm x 72 mm 215 mm x 72 mm *2) 2014/30/EU, 2006/42/EC, 2011/65/EU *3) EN 62841-1:2015, EN 62841-3-9:2015, EN IEC 63000:2018, EN 60825-1: 2014 2021-05-05, Bernd Fleischmann Direktor Produktentstehung & Qualität (Vice President Product Engineering & Quality) *4) Metabowerke GmbH - Metabo-Allee 1 - 72622 Nuertingen, Germany...
-
Page 5: Table Of Contents
ENGLISH en Original Instructions Save all warnings and instructions for future b) Do not use the power tool if the switch does Contents reference! not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and 1. - Page 6 ENGLISH your hand at least 100 mm from either side of p) Let the blade reach full speed before If in doubt, check workpiece for inclusion of the saw blade. Do not use this saw to cut contacting the workpiece. This will reduce the foreign matter (e.g.
-
Page 7: Overview
31 Locking screw of the parallel guides/ripping P<1mW, λ=650nm fences Risk of injury by noise! 32 Locking lever (only KGSV 72 Xact SYM) 7.4 Setting the angle of inclination Wear hearing protection. 33 Safety catches (only KGSV 72 Xact SYM) Swivel the saw head upwards. -
Page 8: Commissioning
(31). – at the front of the saw; mitre cuts, and cutting of grooves). WARNING - Only for KGSV 72 Xact SYM: Align – in front of the saw; If the pulling device is not required, lock the parallel guides/ripping fences (30) flush (in one –... -
Page 9: Care And Maintenance
Wear gloves (34) not lost.) when changing blades. – Only KGSV 72 Xact SYM: Align parallel guides/ 1. Disconnect the mains plug. ripping fences (30) flush (in one line). Push both 2. Put the saw head in the upper position. -
Page 10: Tips And Tricks
– Do not tighten the tensioning screw by hitting Prior to each use If you have Metabo power tools that require the hexagon wrench. repairs, please contact your Metabo service Remove saw chips with vacuum or brush. - Page 11 "Maintenance"). Turntable hard to turn Chips under turntable: remove chips. KGSV 72 Xact SYM: Angle setting hard to effect when moving the table halves (9) Chips under turntable: remove chips. The space under the turntable is accessible through openings on the rear 16.
Need help?
Do you have a question about the KGSV 72 Xact and is the answer not in the manual?
Questions and answers