Pppoe Unnumbered - Planex MZK-04G User Manual

7.4. PPPoE Unnumbered

2
Unnumbered PPPoE can let you manage a range of IP addresses but
only need to dial once. When an IP address is received at the gateway,
At the server side, you must delete the corresponding hot route and
add a new network route so that the packets can be correctly routed
to gateway.
USER ID : Enter the User Name provided by your ISP. (The ID
must be alphanumeric characters and case sensitive.)
Password : Enter the Password provided by your ISP. (The password
must be alphanumeric characters and case sensitive.)
IP Address : Please enter the IP address provided by your ISP.
Subnet Mask : Please enter the subnet mask address provided by
the ISP.
MTU : MTU means Maximum Transmission Unit, the largest
physical packet size, measured in bytes, that a network can transmit.
The default value is 1454. Please set up the MTU according to your
system environment. Only enter a new MTU when your ISP
requires, otherwise, please leave it as the default setting. When using
PPPoE connection, you may need to change MTU settings to
maintain the connection with your ISP, however, if the incorrect
value was entered, you may be unable to access certain websites.
28
MZK–04G