Pppoe - Planex MZK-04G User Manual

7.3. PPPoE

2
If your ISP assigns a new IP address for you whenever you login,
please choose "PPPoE (Point to Point Protocol over Ethernet)" from
the above page.
USER ID : Enter the User Name provided by your ISP. (The ID
must be alphanumeric characters and case sensitive.)
Password : Enter the Password provided by your ISP. (The password
must be alphanumeric characters and case sensitive.)
MTU : MTU means Maximum Transmission Unit, the largest
physical packet size, measured in bytes, that a network can transmit.
The default value is 1454. Please set up the MTU according to your
system environment. Only enter a new MTU when your ISP
requires, otherwise, please leave it as the default setting. When using
PPPoE connection, you may need to change MTU settings to
maintain the connection with your ISP, however, if the incorrect
value was entered, you may be unable to access certain websites.
Reducing the packet size can help connecting to certain websites or
speeding up the transmission rate.
Dial-On-Demand/Silent Timeout : You may disconnect the
connection when there is no activity for a period of time and set the
idle time before you go offline. Enter a maximum period of time
26
MZK–04G