Connection Status - Pppoe - Planex BLW-54MR User Manual

Network Mask
DHCP Server
System
Device Name
Firmware Version
Buttons
Connection Details
System Data
Restart
Refresh Screen

Connection Status - PPPoE

If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed
when the "Connection Details" button is clicked.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either "En-
abled" or "Disabled".
For additional information about the PCs on your LAN, and the IP
addresses allocated to them, use the PC Database option on the
Administration menu.
This displays the current name of the Wireless Router.
The current version of the firmware installed in the Wireless
Router.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
Display all system information in a sub-window.
Clicking this button will restart (reboot) the Wireless Router. All
existing connections though the Wireless Router will be termi-
nated, but will usually re-connect automatically.
Update the data displayed on screen.
Figure 27: PPPoE Status Screen
Operation and Status
39