Planex MZK-04G User Manual page 17

If your MZK-04G Wired Router does not response, and you
below to check if there is any problem:
1. Make sure that MZK-04G Wired Router is properly installed
and powered on, and LAN connection is O.K. You can test the
connection by using "Ping" command:
Open MS-DOS window or click "Start Run..." on the
desktop to show the command prompt window.
Enter the command : ping 192.168.1.1
If it shows the message of "Request time out," the problem
2. If your PC uses static IP address, the IP address must between
in the range of 192.168.1.2~192.168.1.254, in order not to
addition, the subnet mask must be "255.255.255.0." To know
more details of your PC and Internet connection, please check
the TCP/IP settings on your PC.
3. You have to make sure that your PC and MZK-04G are on the
same segment.
"192.168.1.1." In
Chapter 2 Basic Setup & Configuration
2
11