Planex MZK-04G User Manual page 12

1
and Status ERROR LED will be on, and LAN LED will be
blinking for a while and then the MZK-04G will be ready in a short
time and the Status OK LED will be on.
P l u g t h e A C A d a p t e r w h i c h c o m e s w i t h M Z K - 0 4 G i n
a different voltage power supply will cause damage on
MZK-04G, and it is not included in warranty.
System Requirements
Windows, Macintosh, or Linux-based Operating System with an
installed Ethernet adapter
Network cables. Use standard 10/100/1000 BaseT network (UTP)
cables with RJ45 connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either
of a DSL or Cable modem (for WAN port usage)
6
MZK–04G