Planex MZK-04G User Manual page 14

Windows2000/XP
2
1. Please make sure that you do have the authority to access as an
"Administrator" or you are already one of the "System
Administrators."
2. Click "Start Programs Accessories Command Prompt" or
"Start Run...," and then type in "cmd.exe" and press enter.
3. It will appear a "MS-DOS" window.
4. Type
5. MS-DOS will appear your NIC address in the window, please take
notice of the value of "IP Address" and "Default Gateway."
6. The value of "Default Gateway" is the IP address of MZK-04G.
Linux / Unix-Like
1. At first please make sure that your NIC are already enabled and
works properly.
2. And be sure you have "root" number or your already are one of the
members of a "root" group.
3. Please type
4. It will appear your present NIC address in the window, please take
notice of the value of "IP Address" and "Gateway."
5. The value of "Gateway" is the IP address of MZK-04G.
If you can get "IP Address" and "Gateway," normally, it means that you
may use web browser to configure MZK-04G. Type your destination—
"http://192.168.1.1" (default IP Address of MZK-04G) on the Address
Bar in the web browser. If you have changed the default IP Address of
MZK-04G, please type in the new address on the address bar.
8
MZK–04G
after the command of "c:>" and then press enter.
of after "#" and then press enter.