Jumbo Frame; Ipv6 Bridge - Planex MZK-04G User Manual

Destination IP/Netmask : Enter the IP address of packet destination
and Netmask of packet destination.
3
Gateway :
target network is reached.
Metric : Enter the hop count number (the number of gateways used
between the product and target network).
Interface :
Enable : Put a check in the check box to enable each route.
Apply : Click this button to save the settings.
Clear : If there is anything wrong with the settings you made, you
can click "Clear"

1.5. Jumbo Frame

Jumbo Frame support is designed to enhance Ethernet networking
throughput and significantly reduce the CPU utilization of large file
efficient larger payloads per packet. By sending larger payloads per
packet, fewer packets need to be routed, reducing the overhead on the
CPU and potentially improving networking throughput.
Enable : Click to enabled Jumbo Frame function.
Apply : Click this button to save the settings.
Clear : If there is anything wrong with the settings you made, you
can click "Clear"

1.6. IPv6 Bridge

MZK-04G supports IPv6 Bridge function, which can connect between
LAN and WAN in Data. By using this function, you can connect to
38
MZK–04G