How To Set Up Mzk-04G - Planex MZK-04G User Manual

3. How to Set Up MZK-04G

1. Unwrap the package of MZK-04G Wired Router and check if the
components are complete and without missing anything.
2. Choose an Installation Site.
Select a suitable place on the network to install MZK-04G Wired
Router. And make sure that the Wired Router and the DSL/Cable
modem are not powered on yet.
3. Connect LAN Cables.
Use standard LAN cables to connect PCs to the switching hub ports
on MZK-04G. Both 10 Base-T and 100 Base-T connections can be
used simultaneously.
4. Connect WAN Cable.
Connect the DSL or Cable modem to the WAN port on MZK-04G.
5. Power On.
Power the DSL or Cable modem on. At last, connect the adapter
with MZK-04G and plug the other side of the power cord into the
power socket to power on it. While detecting, the Power LED
Chapter 1 Introduction of MZK–04G
1
5