Planex MZK-04G User Manual page 37

USER ID : Enter the User Name provided by your ISP. (The ID must
be alphanumeric characters and case sensitive.)
Password : Enter the Password provided by your ISP. (The password
must be alphanumeric characters and case sensitive.)
MTU : MTU means Maximum Transmission Unit, the largest
physical packet size, measured in bytes, that a network can transmit.
The default value is 1454. Please set up the MTU according to your
system environment. Only enter a new MTU when your ISP
requires, otherwise, please leave it as the default setting. When using
PPPoE connection, you may need to change MTU settings to
maintain the connection with your ISP, however, if the incorrect
value was entered, you may be unable to access certain websites.
Reducing the packet size can help connecting to certain websites or
speeding up the transmission rate.
Dial-On-Demand/Silent Timeout : You may disconnect the
connection when there is no activity for a period of time and set the
idle time before you go offline. Enter a maximum period of time
can set the value to be 0 or Auto Reconnect to disable this function.
Auto Reconnect/Dial Status/Connect/Disconnect : If you choose
Auto Reconnect, MZK-04G Wired Router will automatically
reconnect to your ISP when you restart the system or the connection
is stopped. To enable "Auto Reconnect" you must set "Silent
Timeout"
a warning message. Click "Connect" to manually make a connection
or click "Disconnect" to disconnect the connection.
Auth Type : You may choose PAP or CHAP authentication to
enhance the security of data transmission.
PAP—Short for Password Authentication Protocol, the most
Chapter 2 Basic Setup & Configuration
2
31