How To Set Up Blw-54Cw3 - Planex BLW-54CW3 User Manual

3. How to Set Up BLW-54CW3

1. Unwrap the package of BLW-54CW3 Wireless Router and check if the components are intact
and without missing anything.
2. Choose an Installation Site.
Select a suitable place on the network to install BLW-54CW3 Wireless Router. And make
sure that the Wireless Router and the DSL/Cable modem are not powered on yet.
3. Connect LAN Cables.
Use standard LAN cables to connect PCs to the switching hub ports on BLW-54CW3. Both 10
Base-T and 100 Base-T connections can be used simultaneously.
4. Connect WAN Cable.
Connect the DSL or Cable modem to the Internet port (WAN port) on BLW-54CW3.
5. Power On.
Power the DSL or Cable modem on. Connect the adapter with BLW-54CW3 and plug the
other side of the power cord into the power socket to power on it. While detecting, the
Power LED will be amber, and LAN LEDs will be blinking for a while and then the
BLW-54CW3 will be ready in a short time when the Power LED will be green.
Plug the AC Adapter which comes with BLW-54CW3 in a different voltage power
supply will cause damage on BLW-54CW3, and it is not included in warranty.