Fire-Lite AFM-16ATX User Manual page 6

ABS-1F
The Annunciator Surface Box-1F provides for the remote mount-
ing of a single AFM-16ATX or AFM-32AX annunciator in a surface-
mount enclosure. Knockouts are provided for use with 1/2" con-
duit. The annunciator mounts directly to the ABS-1F without a
dress plate. (H = 8-1/2"
ABS-2F
(not illustrated)
The Annunciator Surface Box-2F provides for the surface mount-
ing of one AFM-16ATX/AEM-16ATF combination or one AFM-
32AX/AEM-32AF combination. Knockouts are provided for use
with 1/2" conduit. The annunciator module mounts directly to the
ABS-2F without a dress plate. (H=8-1/2" W=8-15/16" D=1-3/8")
Note: The ABS-1F and ABS-2F will not support the installation of
the AKS-1F Annunciator Key Switch.
6
W = 4-1/2" D = 1-3/8")
ABF-1F
The Annunciator Flush Box-1F provides for the
remote mounting of a single AFM-16ATX or
AFM-32AX annunciator in a flush-mount enclo-
sure. Knockouts are provided for use with 1/2"
conduit. The ABF-1F includes a trim plate
(height=11" width=6-1/4"), mounting hardware,
and an adhesive-backed Annunciator Label for
the dress plate. (H = 9-15/16" W = 4-5/8" D =
2-1/2")
ABF-2F
(not illustrated)
The Annunciator Flush Box-2F provides for the
flush mounting of one AFM-16ATX/AEM-16ATF
combination or one AFM-32AX/AEM-32AF com-
bination. Includes a trim plate (H=11" W=10-5/
8") and adhesive-backed Annunciator Label.
(H=9-15/16" W=9-3/16" D=2-1/2")
15390 Rev D 8/2/96 P/N 15390:D
Annunciator Label