Fire-Lite AFM-16ATX User Manual page 15

Remove center pages for Slide-In Labels
Two labels are required for the AFM-32AX/AEM-32AF - one for the left-hand side and one
for the right-hand side of the face plate. Each label has a distinctive format.
Set E
Factory-printed zone labels:
These slide-in annunciator labels provide for alarm zones 1
through 32.
Set F
Factory-printed system/custom labels:
These slide-in annunciator labels provide for system control
functions such as Acknowledge, Signal Silence, Supervisory, and
for custom information to be entered into the remaining 56 circuits.
Set G
Factory-printed system/zone labels:
These slide-in annunciator labels provide for system control
functions such as Acknowledge, Signal Silence, Supervisory, and
for alarm zones 1 through 56.
Set H
Custom User Labels:
These blank labels can be customized by the user. If information
is to be typed onto these labels, they should be reproduced on a
copy machine so that the entire page can be inserted into a
typewriter.
Effective Window Size
The size of the visible portion of an AFM-32AX/AEM-32AF label
window is 1/2" high by 1-3/8" across. Using a pitch of 10
characters per inch at six lines per inch, up to two lines of 13
characters may be typed within this window space.
1/2"
AFM-32AX/AEM-32AF Labels
1-3/8"
15390 Rev D 8/2/96 P/N 15390:D
15