Fire-Lite AFM-16ATX User Manual page 14

Two labels are required for the AFM-16ATX/AEM-16ATF - one for the left-hand side and
one for the right-hand side of each module. Each label has a distinctive format.
14
Remove center pages for Slide-In Labels
AFM-16ATX/AEM-16ATF Labels
Set A
Factory-printed zone labels:
These slide-in annunciator labels provide for alarm zones 1
through 56. A blank label for custom labeling is also included.
Set B
Factory-printed system/zone labels:
This set provides labels for system control functions such as
Acknowledge, Signal Silence, Supervisory, and alarm zones 1
through 56.
Set C
Custom labels:
These blank labels provide for customized information by the user.
If information is to be typed onto these labels, they should be
reproduced on a copy machine so that the entire page can be
inserted into a typewriter.
Effective Window Size
The size of the visible portion of an AFM-16ATX label window is 9/
16" high by 1" across. Using a pitch of 10 characters per inch at
six lines per inch, up to three lines of 10 characters each may be
typed within this window space.
9/16"
15390 Rev D 8/2/96 P/N 15390:D
1"