Figure 11: Operating the AFM-32AX
This switch serves two purposes:
1) When pressed, it first lights all the LEDs on the
Local Silence/Acknowledge
annunciator (except the On Line LED) then on the
Switch
expander and also sounds the piezo (provided it
hasn't been disabled) for as long as the switch is
held down.
2) It acknowledges all status changes for the
AFM-32AX. Flashing LEDs will latch on solid and
the piezo will be silenced.
On Line LED
This green indicator flashes during communica-
tion with the control panel.
System Trouble LED
This yellow indicator lights for all trouble condi-
tions in the system (not just for those points or
zones mapped to the annunciator).
Red Alarm LED
32 Annunciator Points
If the annunciator loses communication with the
control panel, the yellow System Trouble LED will flash.
15390 Rev D 8/2/96 P/N 15390:D
22