Operating - Maintenance; Control Panel; Power Led; Charge Led - Studer MBC 12-08 User Manual

OPERATING - MAINTENANCE

GB

CONTROL PANEL

The control panel is made-up of three LEDS:
POWER LED, FLOAT LED and CHARGE LED (BULK, ABSORPTION, see fig.4)
The information supplied by the LEDS are listed below:

POWER LED

Description
LED Color
No mains power or overheating.
Off
In case of overheating check if the installation of the battery charger is correct.
Switch off and allow the equipment to cool down for at least 10 minutes.
Green
Power ON
FLOAT LED
LED Color LED Status Description
Off Off
No indication
FLOAT phase - FLOAT charge
Green Fixed
Short circuit or overload in output.
Flashing
Green
Check output cables, the group of batteries and the points of use connected to the battery charger.

CHARGE LED

(BULK, ABSORPTION)
LED Color LED Status Description
Off Off
No indication
Yellow Fixed ABSORPTION phase or BULK phase
Short circuit or overload in output.
Flashing
Yellow
Check output cables, the group of batteries and the points of use connected to the battery charger.
MAINTENANCE
The battery charger does not need any maintenance. To ensure optimum performance from the
equipment, once a year check the cables and the electrical connections.
9