Image Setup - D-Link DCS-942L User Manual

Section 4 - Configuration

Image Setup

This section allows you to configure the image settings for your
camera.
Brightness Control: Allows you to adjust the brightness level.
Contrast: Allows you to adjust the contrast level.
Mirror: Horizontally flip the video.
Light Source: This setting adjusts the light sensitivity of the lens for
optimum performance for either indoor or outdoor settings.
White Balance: Allows you to set the camera to automatically set
the white balance of the image.
Saturation: Allows you to adjust the saturation level.
B/W: Changes the images recorded on the camera to be in black and
white.
Flip: Select this box to vertically flip the video. If the camera is
installed upside down, Flip Image and Mirror should both be
checked.
Frequency: Adjusts the video output. By default this is set to Auto
but you may override the setting by manually selecting either 50Hz
or 60Hz depending on the television system used in your region of
the world.
Slow Shutter: Allows you to select a slow shutter speed so as to
capture more light in the image. You can select from 1/15 second,
1/10 second, 1/7.5 second or 1/3.75 second.
Change to the image settings are effective immediately.
D-Link DCS-942L User Manual 31