Image Setup - D-Link DCS-960L User Manual

Section 4: Configuration
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Brightness:
Adjust this setting to compensate for backlit subjects.
Contrast:
Adjust this setting to alter the color intensity/strength.
Sharpness:
Specify how much sharpening to apply to the image.
Mirror:
This will mirror the image horizontally.
Anti flicker:
This option adjusts the camera sensor's setting to avoid the image
flickering under certain light sources, such as florescent lights.
Saturation: This setting controls the amount of coloration, from grayscale to
fully saturated.
Hue:
Allows you to adjust the hue (shift the color value) of the video.
B/W:
Select to change the video to black and white.
Flip:
Check the box to flip the image vertically. If the camera is installed
upside down, Flip and Mirror should both be checked.
Reset to Default: Click to reset all the settings on this page to the default values.
D-Link DCS-960L User Manual

Image Setup

29