Advertisement
Vizualogic
DVD Headrest
Figure 12
Yellow Harness
Power Wire
Black Harness
Power Wire
Red Harness
Power Wire
Figure 13
Wire Tap
Blue/Pink Wire
Plug Attached
to Driver Side
Red Harness Power Wire
Power Outlet
Figure 14
12+ Power Outlet
Passenger Side
12+ Power Outlet
Simplified Wire Illustration from Steps 18 and 19.
Page 5
A-1250™ & A-1150™
®
"JK" Wrangler Installation Instructions
Power Outlet Plug
Lift Dash
Panel
WIRE TAP
CONNECTOR
Driver Side
Blue with Pink Stripe
Red with Green Stripe
Black with White Stripe
19. Disconnect the plug attached to the driver side power
outlet.
a. Attach a wire tap connector to the ( BLUE with PINK stripe)
wire at the Driver side Auxiliary Power Outlet plug. Connect
the RED wire from the power harness to the wire tap as
shown.
(Figure 13)
b. Tuck all wiring away and Reconnect the driver side
Auxiliary Power Outlet plug.
20. Reinstall the two center dashboard fasteners and
the Fascia Panel.
21. Lift the rear of the center console above the floor an
inch or so and finish tucking all harness wiring underneath.
22. Secure the four torx fasteners that secure the center con-
sole to the floor.
23. You are now ready to test and enjoy your Headrest
Monitor/DVD System. Be sure to read and understand the
Vizualogic Owner's Manual.
RED FROM POWER HARNESS
WIRE TAP
CONNECTOR
YELLOW FROM POWER HARNESS
WIRE TAP
BLACK FROM POWER HARNESS
CONNECTOR
www.quadratec.com
Advertisement
