Acroprint ATR120 Service Manual page 30

Remove the Friction Spring, Friction shaft and Friction roller
1. Remove two screws
shaft and friction roller are also removed.
Screw : P.H. Screw with SPW M
E
2. remove two friction shaft snap rings
(Snap rings : JE-4, SK; 2PCS P/N: NTR-08-018)
H
Remove the Switch lever
1. Remove two screws
screw : P.H. Screw with SPW M
D
2. Pull the Switch Lever out of the snap of Switch Lever B. Position accurately.
fixing the right and left friction springs to remove the friction springs. The friction
E
. Be careful not to damage the roller sliding part on the friction shaft.
H
Switch lever B
fixing Switch Lever B.
D