Motorola DCX3501-M Installation Manual page 82

Diagnostics
Field Description
S/PDIF Output Indicates S/PDIF Mode as set by application software.
OSD Display
N/A
IEC958PCM
Dolby Digital
1/0
2/0
3/0
2/1
3/1
2/2
3/2
LFE: Low The LFE indicates if the nomenclature low frequency effects are available in the Dolby
Frequency Effect Digital audio stream, as indicated if the "0.1" is present in the Dolby Digital 5.1
nomenclature (for example, "Dolby Digital 5.1 surround"). Valid values include:
OSD Display
0
1
Dolby Volume Indicates if Dolby Volume is turned on or off
Audio / Video The Audio and Video Mute Status indicates if the audio and/or video have been muted
Mute by the software. The audio mute is either On or Off. The Video Mute describes the
MPEG muting method selected by the software and indicates if the output video is in
the mute state by displaying On or Off, followed by the mute method. Methods
include:
OSD Display
UNMUTED
MUTE to STILL
MUTE to BLACK
Captions The captions mode displays captions present on the service.
Note: The caption options are set via the User Setting Menu, where the subscriber
can enable closed captions and select options.
High-Definition DVR DCX3501-M • Installation Manual
365-095-16528-x.2
Description
Audio S/PDIF mode is not applicable.
PCM audio selected.
Dolby Digital uses the following speaker selections:
Right front or left front
Right front and left front
Right front and left front and center
Right front and left front and (right rear or left rear)
Right front and left front and center and (right rear or left rear)
Right front and left front and right rear and left rear
Right front and left front and center and right rear and left rear
Description
LFE is not available
LFE is available (i.e. "Dolby Digital 5.1 surround").
Description
Displayed if the mute method is not selected.
Displayed if the mute method includes stopping video and
presenting a still frame, similar to a pause function.
Displayed if mute method presents a black screen.
B
72