Table of Contents
Advertisement
Q u i c k
Connecting to Other Cradles
Up to 25 cradles can be connected in series using an RS-232 inter-
cradle cable (p/n 60427-00-00).
Caution: Each cradle must have its own power supply; any other
method of power hookup is unsafe.
1. Plug one end of the inter-cradle cable into the communication
port located on the right end of the first cradle.
2. Plug the other end of the inter-cradle cable into the communi-
cation port located below the power connector on the left end
of the second cradle .
3. Connect power supply to second cradle as described in "Con-
necting Power" on page 2.
4. Repeat the above steps for any additional cradles you wish to
connect.
Sending Data
1. Place the terminal in the cradle.
2. Press the appropriate key on the terminal as required by your
application program. The cradle's red COMM indicator
blinks when communication begins.
R e f e r e n c e
5
Advertisement
Table of Contents
