Setting Up The Text-In - PACOM PDR16-PC User Manual

Setting Up the Text-In

 Text-In device: Select a text-in device icon
NOTE: Up to 4 text-in channels are available using the WIBU key.
 Use Text-In OSD: Check the box if you want to display text-in information on the image. The box will be activated
when a camera is associated with the text-in device.
 Enable: Check the box to enable to use the selected text input device.
 Select Text-In System: Set up the text-in device. Select the model of installed text-in system from the Text-In
Model list, and the COM port to use from the drop-down list. Click the Set up port... button to display the Set up
COM Port dialog box. Set the Baud rate from 300 to 256,000, select the Parity from None, Even or Odd parity,
select the Data bit from 7 bit or 8 bit format, select the Stop bit from 1 bit or 2 bits from the drop-down list. You
can save your changes by clicking the OK button. Selecting Cancel exits the dialog box without saving the changes.
 Device: Select the type of text-in device to use.
NOTE: Each type of text-in device (User Define, GnomeII and so on) has different setup options which can be
defined by the user.
NOTE: When using the RS232 port, select COM 1 from the COM Port drop-down list. When using the RS485
port, select the given COM Port number. To check the given COM port number, please refer to the installed card
information displayed on the System Info. dialog box by clicking the System Info. button.
NOTE: The hard disk drive for saving image files must have at least 700MB free space.
NOTE: The recording speed might decrease when the image files from multiple cameras are saved at the same time.
 Syntax
– Case Sensitive: Check the box to distinguish between capital letters and small letters from text-in data.
– Transaction Start: Enter the character string to be considered as transaction start. If the Any character box is
checked, preset any character will be considered as transaction start.
to set up.
Digital Video Recorder
19