Setting Up Cameras - PACOM PDR16-PC User Manual

 Set up backup...: Set up backup information. Refer to Chapter 4 — SmartBackup for details.
 Set up Web Server...: Set up an IIS (Internet Information Services) for the WebGuard program.
Click the Load... button if you want to load typical settings. Click the Save... button if you want to save the current
settings. Click the Default button if you want to load default settings. You can save your changes by clicking the OK
button. Selecting Cancel exits the dialog box without saving the changes.
NOTE: Only the administrator level user can use the Load, Save and Default buttons.

Setting Up Cameras

CAUTION: The recording speed may not be achieved when averaged over all the cameras.
− Use S.M.A.R.T.: Check the box if you want to use S.M.A.R.T.
function.
− Show an alert dialog if HDD status is unstable: Check the box
if you want to display an alert message when the DVR senses that
the hard disk drive status is Poor. Once the alert message displays,
replacing the hard disk drive as soon as possible is recommended,
usually within 24 hours.
− Delay for the first inspection after system starts: Set the standby
time until the system performs the first inspection after the system
starts.
− Inspection interval: Set the inspection interval.
− Threshold temperature for alert: Set the threshold temperature
of hard disk drives. The DVR logs an event when the temperature
of hard disk drives exceeds the defined threshold.
Digital Video Recorder
9