Operation; Description Of Operation; 5.1 Adjustment Of Parameters - junger Accent1 Operation Manual

OPERATION

DESCRIPTION OF OPERATIONS
The use of the digital dynamics processor ACCENT is very easy.
The setup or the programming of the digital dynamics processor ACCENT is made by adjustment of
various parameters and settings.
The description is made related to the functions in the menus.

5.1 adjustment of parameters

5.2 level display
5.3 gain menu
5.4 config menu
5.5 compressor menu
5.6 limiter menu
5.7 expander menu
5.8 filter menu
5.9 setup menu
5.10 recall and storage of presets
Following syntax is used:
ADJUSTMENT OF PARAMETERS in all menus
After selection of one of the menus by pushing any of the buttons GAIN, CONFIG, COMPRESSOR,
LIMITER, EXPANDER, FILTER, PRESET or SETUP one can adjust displayed parameters.
SELECT
push
SELECT
turn
Each time SETUP button is pushed it opens next setup menu.
SYMBOL
describes
how to use
button or
rotary knob
push
turn
push + turn
switches between parameter selection and
parameter adjustment mode, selected
parameter or value is highlighted by arrows on display
change of parameter selection or
adjustment of selected parameter value (see menu explanation)
Operation manual accent2, chapter 5 -Operation- page 5-1
ACTIVITY
describes
action or function of
button or
rotary knob
push
5. OPERATION
5
5.0
5.1