HDTV TRANSMODULATOR - Dual 8PSK to QAM
8
There are 3 tabs, Status, Setup, and Advanced. A sample Status screen is
shown.
9
Setup function: You can modify all the input and output parameters here.
10
Advanced functions allow you to change the address of the module.
Using TSuite software in local mode, programming modules
through the CDC.
Preliminary considerations
1. Direct connection between the PC and the CDC module with a
data cable RJ45-RJ45.
2. The transmission of information is done through a network
interface. To do this, configure the computer's IP to be on
the network of IP CDC module. The CDC IP module can be
configured by the programmer, but by default is 169.254.1.253.
32