11. Firmware Updates
Introduction
To update the Firmware of the unit you will need
additional hardware and a software package:
•
USB - Serial Port adapter.
•
Cable DB-9 to RJ45.
•
PauTves software package.
Unzip the PauTves tool to a known location and
run the program:
Select English as preferred language if needed:
Verify the port configured in the program
("Configure Serial Port") is the one you have your
COM/SERIAL adaptor connected to:
Then click on "Update FPGA":
The program will detect the connected unit as a
563701:
Press OK and the following window will appear:
27
EN