Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hisense LCD3704
Summary of Contents for Hisense LCD3704
- Page 1 LCD COLOUR TV USER'S MANUAL LCD3704NEU Part No:...
-
Page 2: Table Of Contents
..................Selecting a location for the TV Learning about your TV . -
Page 3: Important Safeguard
When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot. To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on the power cord. -
Page 4: Osd Language Settings
Notes: The Plug & Play menu is only displayed once when you turn on the TV. If you want to select this menu, please follow the instructions below: 1).Press the [Menu] button to enter the main menu. -
Page 5: Preparation For Your New Tv
Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. -
Page 6: Preparation For Using Your New Tv
Preparation for Using your new TV Remote Sensing Window Power indicator Headphone output Menu button Source select Volume down / cursor left Volume up / cursor right Channel down / cursor down Channel up / cursor up Power button (standby) Note: The above figures are for reference only, please refer to the actual units to determine their appearance. -
Page 7: Connecting Your Tv
Preparation for Using your new TV Connecting your TV Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting to A/V equipments To enjoy its multimedia features, you can connect your receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. -
Page 8: Connecting To An Antenna
To VGA Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. -
Page 9: Using The Remote Control
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. -
Page 10: Learning About The Remote Control
Using the remote control Learning about the remote control Channel number: Direct channel selection Recall : Return to previous channel P.Mode:Select picture mode CH+:Channel up VOL-:Volume down CH-:Channel down S.Mode:Select sound mode Still:Snapshooting Zoom:Ajust zoom ration Video:Switch to Video source Source:Switch input source :Switch to YP source... -
Page 11: Using The Tv Features
Signal source selection Press [CH+/CH- ] button to select TV main source input; press the [SOURCE] button to select TV ,YP S-video,VGA,DVI, scart1,scart2 and scart3 input;press the [VIDEO] button to select VIDEO input; press the [S-VIDEO] button to select S-VIDEO input;... - Page 12 When you changing the channel, the sound state graphics can be displayed below the channel number. There are 3 sound states in this TV. If the sound is mono, the graphics is If the sound is NICAM dual I/II, the graphics is Which indicate preset of picture system and sound system.
-
Page 13: Using The Tv Settings Menu
AUTO-Search 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item TV settings. 3) Press the [CH+ or CH-] button to select Auto search and press the [ VOL+ ] button to enter Auto search . -
Page 14: Using The Picture Menu
Channel edit 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item TV settings. 3) Press the [CH+ or CH-] button to select Channel edit. 4) Press the [ VOL+] button to start Channel edit. -
Page 15: Using The Osd Setting Menu
Using the TV features Using the OSD settings menu OSD position 1) Press the [MENU] button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item OSD settings. 3) Press the [CH+ or CH-]... -
Page 16: Using The General Settings Menu
Using the TV features Using the General settings menu Colour system You can set colour syetem. 1) Press the [MENU] button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item General settings 3) Press the... -
Page 17: Teletext Operations
Press the [ YPbPr ] button to switch to the TV mode. When the required page is found, the page number will appear at the top of the TV picture, press the [ YPbPr ] button to return to the selected Teletext page. - Page 18 Press [ Zoom ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need. You can mix Teletext with TV pictures, which means transparent teletext. Press [ Swap ] to mix, and press [ Swap ] again to cancel the mixed effect.
-
Page 19: Appendix
Cation:The output of video and audio are always from turner of R F. Arrangement 3 allows for composite video input, S-Video inputs,and stereo audio input/output. TV can auto check aspect ratio in scart. SCART arrangement 1 Signal level 0.5V rms 0.5V rms... - Page 20 WARNING: Do NOT attempt to work on ANY equipment unless you KNOW what you are doing. SCART arrangement 2 Signal level 0.5V rms 0.5V rms 0.5V rms 0.5V rms High (9.5 - 12V) - AV mode Mid(5-8V)-Wide-screen Low (0-2V) - TV mode 0.3V 1V including sync 1V including sync -18 - Impedance <1kohm >10kohm <1kohm >10kohm...
-
Page 21: Cleaning And Care
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause damage to the TV. -
Page 22: Troubleshooting
The remote control does not operate Disorder display at power on Customer important notice: When the TV can not be operationed in some special situation,please unplug the power and restart. Possible Solutions Make sure the power cord is plugged in, then press [Power]. -
Page 23: Specifications
Specifications 940.3mm TFT LCD LCD panel Multi- system(PAL,SECAM) Television system VHF-L: E2-S8 Channel coverage VHF-H: S9-S37 UHF: 640X480/60Hz,800X600/60Hz,1024X768/60Hz,1280X1024/60Hz Analog RGB mode 480I/60Hz,480P/60Hz,576I/50Hz,576P/50Hz,720P/50Hz,720P/60Hz, mode 1080I/50Hz,1080I/60Hz 1366X768 Resolution 600:1 Contrast 500cd/m Brightness Viewing angle 176 (H)/176 (V) AC160V--240V, 50/60Hz Power source Power consumption 200W 5W+5W Audio output...