Do you have a question about the ITVS-750 and is the answer not in the manual?
Questions and answers
Monica Brown
February 2, 2025
Turntable won’t spin
1 comments:
Mr. Anderson
February 10, 2025
The Innovative Technology ITVS-750 turntable may not spin due to the tone arm balancer being incorrectly adjusted. The silver screw on the back of the turntable acts as a balancer for both the turntable and the tone arm. Adjust this screw using a coin and test by moving the tone arm to the middle of the spindle. The tone arm should move freely to the end of the record without resistance before using the turntable.
This answer is automatically generated
Tina
February 9, 2025
The turntable won't spin.
1 comments:
Mr. Anderson
February 11, 2025
The Innovative Technology ITVS-750 turntable may not spin due to the following reasons:
1. Tone Arm Balance Issue – The silver screw on the back of the turntable acts as a balancer for both the turntable and the tone arm. If it's not adjusted correctly, the tone arm may not move freely, preventing the turntable from spinning. Adjust the screw with a coin until the tone arm moves freely to the middle of the spindle.
2. Tone Arm Holder Secured – If the tone arm is still secured with the fixed rope, it will not function properly. Ensure the fixed rope is loosened and the tone arm is uplifted.
3. Protective Needle Cover Attached – The white protective needle cover must be removed before use. Gently pull it towards the front of the unit.
4. Power Connection Issue – Ensure the AC power cord is properly connected to a wall outlet.
If the turntable still does not spin after checking these points, further troubleshooting may be needed.
This answer is automatically generated
d Milligan
March 20, 2025
Need replace volume control switch
D. Milligan
March 23, 2025
Need volume control #e-696oai-03
1 comments:
Mr. Anderson
March 23, 2025
You can control the volume on the Innovative Technology ITVS-750 by turning the "VOLUME" knob. The volume ranges from 00 to 32.
This answer is automatically generated
Related Manuals for Innovative Technology ITVS-750
Need help?
Do you have a question about the ITVS-750 and is the answer not in the manual?
Questions and answers
Turntable won’t spin
The Innovative Technology ITVS-750 turntable may not spin due to the tone arm balancer being incorrectly adjusted. The silver screw on the back of the turntable acts as a balancer for both the turntable and the tone arm. Adjust this screw using a coin and test by moving the tone arm to the middle of the spindle. The tone arm should move freely to the end of the record without resistance before using the turntable.
This answer is automatically generated
The turntable won't spin.
The Innovative Technology ITVS-750 turntable may not spin due to the following reasons:
1. Tone Arm Balance Issue – The silver screw on the back of the turntable acts as a balancer for both the turntable and the tone arm. If it's not adjusted correctly, the tone arm may not move freely, preventing the turntable from spinning. Adjust the screw with a coin until the tone arm moves freely to the middle of the spindle.
2. Tone Arm Holder Secured – If the tone arm is still secured with the fixed rope, it will not function properly. Ensure the fixed rope is loosened and the tone arm is uplifted.
3. Protective Needle Cover Attached – The white protective needle cover must be removed before use. Gently pull it towards the front of the unit.
4. Power Connection Issue – Ensure the AC power cord is properly connected to a wall outlet.
If the turntable still does not spin after checking these points, further troubleshooting may be needed.
This answer is automatically generated
Need replace volume control switch
Need volume control #e-696oai-03
You can control the volume on the Innovative Technology ITVS-750 by turning the "VOLUME" knob. The volume ranges from 00 to 32.
This answer is automatically generated