System Alarm; Status Overview - Nuvico AP-C1600 User Manual

6. SYSTEM ALARM

HDD FAIL
HDD ALMOST FULL
PASSWORD FAIL
DDNS REG-FAIL
MRR-DISK FULL
VIDEO LOSS
WANING MESSAGE
BUZZER
SEND E-MAIL
RELAY-4 ON
*HDD ALMOST FULL is only functional when HDD OVERWRITE is set to OFF.

7. STATUS OVERVIEW

Revision 6.0
The DVR uses various event sources for system alert.
SYSTEM ALARM SOURCE
Sends an alert incase of hard disk fail or errors
Sends an alert when HDD is almost full based on DISK UTILITY configuration
Sends an alert incase of login attempt fails
Sends an alert when DDNS registration fails
Sends an alert when mirrored disk is full
Sends an alert incase of video loss (*a camera must set to USE OFF from the
DEVICE menu in order to bypass the VIDEO LOSS)
SYSTEM ALARM METHOD
Pop-up message
Audible buzzer built-in to the DVR
Sends e-mail based on the configuration of NOTIFICATION under NETWORK menu
Triggers relay 4
STATUS OVERVIEW displays
Current record settings, Host Name, Firmware Version, Total HDD
Size, Free Space, and the status of the installed HDDs.
When the DVR cannot detect a hard disk drive, the corresponding
drive port is displayed in red.
58
APEX SERIES DVR