Audio; Com Port; Text Inputs - Nuvico AP-C1600 User Manual

MONITOR SELECT
EVENT POP-UP
CAMERA SEQ
VGA MODE
COVERT CHANNEL LIST
SEQUENCE TOUR LIST
MONITOR SWITCHING

3. AUDIO

4. COM PORT

*COM1 can be connected directly to the serial port of the NUVICO junction box for NVCK-3X keyboard
controller for a direct communication.

5. TEXT INPUTS

Revision 6.0
MONITOR SELECT 1-4
EVENT POP-UP INTERVAL:
or motion triggers.
CAMERA SEQUENCE INTERVAL
VGA DISPLAY MODE: 800x600, 1024x768, 1280x1024
CONVERT CHANNEL LIST: Configure channels to be hidden on LIVE and
PLAYBACK. The hidden channels are still being recorded.
Each monitor can have different set of hidden channels.
SEQUENCE TOUR LIST: Customized tour mode up to 16 custom sets. Each set can
display from single camera display to 16 camera display mode.
MONITOR SWITCHING ON/OFF: Toggle between monitor 1 and 2 on MONITOR 1
and VGA output. (ONLY AVAILABLE IN AP-F3200)
*When this function is ON control for MONITOR 3,4 will be disabled.
DVR allows user to synchronize audio channels with desired video
channel. Also, the Audio Gain level may be adjusted.
Configure devices such as PTZ cameras and Keyboard Controller
that utilize COM ports.
RS-232C is fixed for COM 1 & 3(AP-D,F), COM 1(AP-C)
RS-485 is fixed for COM 2 & 4(AP-D,F), COM 2 & 3(AP-C)
After making physical connection, Select the appropriate device
and then enter the corresponding baud rate, parity, stopbit, and
databit.
Configure text input devices such as POS system.
COM1 must set to TEXT mode in order for the TEXT INPUTS
mode to function properly.
*APEX DVR supports VSI Pro from AVE in single and network
mode.
43
Displays a camera(s) in full screen when an alarm
APEX SERIES DVR