Table of Contents
Advertisement
3. IR REMOTE CONTROLLER
1. POWER : This button turns the DVR off.
2. ID : This is button is to set the ID of the remote controller. Press this button 16 times or until
the DVR beeps to match the ID with the DVR
3. MON : This button is used to select different monitors to control.
4. SEQ : This button is used to activate camera sequencing. Press and hold to activate Sequence
Tour List.
5. SELECT : This button is used to select a camera for PTZ control in multi display mode.
6. LOCK : This button is used to lock the buttons on the front panel/remote controller by logging off.
Press it again and then apply appropriate password to login.
7. BACKUP: This button is to enter BACKUP menu.
8. ACK : This button is used to manually turn off alarm relay and buzzer when set for unlimited
duration.
9. OSD : This button is used to change on screen display.
10. PANIC : This button is used to manually turn on/off the Panic recording mode. It can be manually
configured in Quick Setup menu.
11. Numeric Buttons 0~9 & +10
Revision 6.0
15
APEX SERIES DVR
Hide quick links:
Advertisement
Table of Contents
