Locate / Change The Smart Card - Contex GX67D Operator's Manual

Maintenance

7.6 Locate / Change the Smart Card

Check that the Smart Card is correctly installed (contact side downwards) and corresponds to
your scanner model. The scanner will function correctly only with a Smart Card inserted.
Be sure that the scanner is turned off when removing/inserting a Smart Card or
accessing the Smart Card area.
Locating the Smart Card
On Scanners
On the flatbed scanners you will find the Smart Card at the scanner's back near the interface
connectors and above the power switch. The Smart Card is placed in its insertion slot.
Locating the Smart Card
On Scanners
On these models you will find the Smart Card by removing the scanner's right side cover. The
Smart Card is placed in its insertion slot above the scanner interface connectors.
Be sure to reattach the cover after inserting the smart card. The cover must always be
closed before you turn the scanner ON.
Smart Card slot near interface connectors
and main power switch
7-19