Routing - Encore EN2HWI-N3 User Manual

3.2.6

Routing

This section adds a new entry into the routing table.

Name: Specify a name for the rule.

Destination IP: Specify the destination IP address.

Netmask: Specify the subnet mask for the IP address.

Gateway: Specify the IP address of the gateway.

Metric: Specify the number of routing hops. The route metric is a value from 1 to 16
that indicates the cost of using this route. A value of 1 is the lowest cost, and 15 is the
highest cost. A value of 16 indicates that the route is not reachable from this router.
When trying to reach a particular destination, computers on your network will select
the best route, ignoring unreachable routes.

Interface: Select LAN or INTERNET from the drop-down list.

Click on the Add button to insert the entry into the Routes List.
59
www.encore-usa.com