Advertisement
Quick Links
Wireless Configuration
The setup of the Wireless Broadband Router can be performed properly using the following
methods:
•
The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
•
Visually inspect the DC power jack and make sure that it is fully secured to the power
adapter.
•
Make sure that there is proper heat dissipation from and adequate ventilation around the
Broadband Router. Do not place heavy objects on the Broadband Router.
•
Fix the direction of the antennas. Try to place the Wireless Router in a position that can
best cover your wireless network. Normally, the higher you place the antenna, the better
the performance will be. The antenna's position enhances the receiving sensitivity
Connect the Router on a Wired LAN environment
*Before you begin, insure that your have a stable internet connection
1. Plug in one end of the network cable to the WAN port of the Wireless Internet Broadband
Router.
2. Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable
modem.
3. Use another network cable to connect to the Ethernet card on the computer system; the
other end of the cable connects to the LAN port of the Internet Broadband Router. Since
the Wireless Broadband Router has four ports, you can connect up to four computers
directly to the unit. There you do not have to buy a switch to connect these computers
Encore Electronics Inc 2005
Wireless Configuration
1
Advertisement
Related Manuals for Encore ENHWI-SG
Summary of Contents for Encore ENHWI-SG
- Page 1 LAN port of the Internet Broadband Router. Since the Wireless Broadband Router has four ports, you can connect up to four computers directly to the unit. There you do not have to buy a switch to connect these computers Encore Electronics Inc 2005 Wireless Configuration...
- Page 2 4. If you are having difficulties with the router. You may want to reset the router by pressing the “reset” button the other back while the power is on. Hold the button for 30 seconds Encore Electronics Inc 2005 Wireless Configuration...
- Page 3 TCP/IP setting window. 1. Set “IP address” to “Obtain an IP address automatically.” 2. Set “DNS” to “Obtain DNS server address automatically.” 1. Open Internet Explorer (or some type of internet browser) Encore Electronics Inc 2005 Wireless Configuration...
- Page 4 “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue Step 1: Set up new Password User can change the password and then click “Next” to continue. Encore Electronics Inc 2005 Wireless Configuration...
- Page 5 Set user’s IP address and mask. The default IP is 192.168.1.1. If user likes to enable DHCP, please click “Enabled”. DHCP enabled is able to automatically assign IP addresses. Please assign the range of IP addresses in the fields of “Range start” and “Range end”. Please click “Next” to continue. Encore Electronics Inc 2005 Wireless Configuration...
- Page 6 PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP. Obtain IP automatically (DHCP client): If user has enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the router assign IP addresses automatically Fixed IP Address Encore Electronics Inc 2005 Wireless Configuration...
- Page 7 If the Internet Service Providers assign a fixed IP address, choose this option and enter the assigned IP address, subnet mask, gateway IP and DNS IP addresses for your Broadband Router. PPPoE to obtain IP automatically: Encore Electronics Inc 2005 Wireless Configuration...
- Page 8 Mask, Gateway, Server IP, PPTP Account and PPTP Password, Your Subnet Mask required by your ISP in the appropriate fields. If your ISP has provided you with a Connection ID, enter it in the Connection ID field, otherwise, leave it zero. Encore Electronics Inc 2005 Wireless Configuration...
- Page 9 Click “Enable” to enable wireless LAN. If user enables the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router. The SSID will be broadcasted to other wireless devices. Encore Electronics Inc 2005 Wireless Configuration...
- Page 10 LAN & DHCP Server This page leads to set LAN and DHCP properties, such as the host name, IP address, subnet mask, and domain name. LAN and DHCP profiles are listed in the DHCP table at the bottom of the screen Encore Electronics Inc 2005 Wireless Configuration...
-
Page 11: Wan Settings
End IP: Type an IP address to serve as the end of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the router. Domain Name: Type the local domain name of the network in the text box. This item is optional. WAN Settings Encore Electronics Inc 2005 Wireless Configuration... - Page 12 SSID: Type an SSID in the text box. The SSID will be displayed for wireless devices that do a local scan. The SSID of any wireless device must match the SSID typed here in order for the Encore Electronics Inc 2005 Wireless Configuration...
-
Page 13: Authentication (Security)
Manually enter a set of values for each key. Select a key to use by clicking the radio button next to the key. Click “Clear” to erase key values. This key must be provided to other wireless devices in order to gain connection onto the network. Encore Electronics Inc 2005 Wireless Configuration... - Page 14 3. Enter the IP address of, Port and Shared Secret used by the Secondary Radius Server. If WPA-PSK is selected, please set the PSK key in the pass phrase field. The pass phrase should be 8 characters at least. Encore Electronics Inc 2005 Wireless Configuration...
- Page 15 Advanced This screen enables user to configure advanced wireless functions. Encore Electronics Inc 2005 Wireless Configuration...
- Page 16 1 and 65535. The default value is 3. TX Rates (Mbps): Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the speed of wireless adapters connected to the WLAN. Encore Electronics Inc 2005 Wireless Configuration...