Routing; Static - Encore ENHWI-SG User Manual

3.4 Routing

This selection enables you to set how the router forwards data: Static and Dynamic.
Routing Table enables you to view the information created by the router that displays
the network interconnection topology
.
3.4.1

Static

It enables you to set parameters by which the router forwards data to its destination if
your network has a static IP address.
Network Address: Type the static IP address your network uses to access the Internet.
Your ISP or network administrator provides you with this information.
Network Mask: Type the network (subnet) mask for your network. If you do not type a
value here, the network mask defaults to 255.255.255.255. Your ISP or network
administrator provides you with this information.
Gateway Address: Type the gateway address for your network. Your ISP or network
administrator provides you with this information.
Interface: Select which interface, WAN or LAN, you use to connect to the Internet.
Metric: Select which metric you want to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom of the
page.
27