Network Settings; Bridge Mode - Encore EN2HWI-N3 User Manual

3.1.4

Network Settings

The EN2HWI-N3 can be configured at a Router or a Bridge. Select Router mode if the
WAN port is connected to the Internet. Select Bridge if the device is connected to a local
network downstream from another router.

Bridge Mode

In this mode, the device functions as a bridge between the network on its WAN port and the
devices on its LAN port and those connected to it wirelessly. Select the Bridge Mode radio
button.
Scroll down to see more of the status information.
 Router IP Address: Enter the IP address.
 Subnet Mask: Enter the subnet mask for the IP address.
31
www.encore-usa.com