Table of Contents
Advertisement
3.1.5
Wireless Settings
These options allow you to enable/disable the wireless interface, switch between the 11b,
11g, and 11n. Mixed radio band and channel frequency, setup for multiple SSID as well.
Enable Wireless: Place a check in this box to enable the wireless interface, it is enabled
by default.
802.11 Mode: Select the IEEE 802.11 mode from the drop-down list. For example, if you
are certain that the wireless network will be using only IEEE 802.11g clients, and then it is
recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select Mixed 802.11n, 802.11g and
802.11b. If all of the wireless devices you want to connect with this router can connect in
the same transmission mode, you can improve performance slightly by choosing the
appropriate "Only" mode. If you have some devices that use a different transmission
mode, choose the appropriate "Mixed" mode.
41
www.encore-usa.com
Advertisement
Table of Contents
