C. Port Chaise Lounger Seat - Four winns 248 Vista Owner's Manual

Certain Vista™ aft cockpit stern seat cushions folds up
against the transom to allow for more floor space and
access to the engine lids. The forward cockpit cushion
can be locked in a raised position with a block attached
to the bottom of the cushion. This too, provides easier
access to the forward engine lid. Some cushions can
also be removed.
Make sure legs are vertical and locked before
using the aft stern seat.
When storing the aft stern seat up against the
transom, be sure the legs are folded and secured
to prevent damage to the seat or injury to people.
Nylon straps are provided to secure the seat in the stored
position against the transom. The straps snap to the
underside of the aft stern seat and are designed to wrap
around the stern rail.
On some models the aft cockpit stern seat cushion
can be removed by lifting up and out. This allows for
easier access to the engine compartment. Refer to
Figure N11.
Stern Seat
Brackets
Figure N11: Removable Aft Stern Seat Cushion Assembly
Make sure legs are vertical and locked before
using the aft stern seat. Also, ensure the stern
seat brackets are locked in their proper posi-
tion before use.
Vista™ Owner's Manual
Stern Seat
Cushion
Bolt
Stern Seat Leg
™

C. Port Chaise Lounger Seat

On certain models a port "wrap around" chaise lounge
provides seating capacity for two people. It is conve-
niently built into an integrated fiberglass base which
also contains the refreshment center. Storage is pro-
vided underneath the removable or hinging seat cush-
ion. See Figure N12.
Figure N12: Port Chaise Lounge
D. Cockpit Table
Depending on the model an aft cockpit table is either
standard or optional. Table bases are "flush" mounted
for convenience and safety.
To set up the cockpit table:
1. Insert the table leg into the floor mount.
2. Mount the cockpit table onto the table leg.
Section N
Page 4