Woodwork And Composites - Four winns 248 Vista Owner's Manual

WOODWORK AND COMPOSITES

Q - 1 HIGH-PRESSURE LAMINATE CARE
Much of the Vista™ interior components such as the
shelving, head door, closets, closet door and drawer fronts
consist of a high pressure laminate material. The finish is
that of a synthetic cherry and can be cleaned with hand
dish washing soap and water or other cleaning solutions
such as Fantastik™. Always read the label before using
any product.
NOTICE
DO NOT use abrasive cleaners or solvents on
laminate. DO NOT use Soft Scrub soap or simi-
lar cleaning products; they will scratch the sur-
face and remove the shine.
Q - 2 CHERRY
Four Winns uses cherry wood trim throughout the Vista™
model interiors. The wood is prepared with a light stain
followed by a polyurethane finish. To clean, a damp cloth
will usually suffice. Care should be similar for cherry as it
is for fine, household furniture. See Figure Q1.
Figure Q1: Cherry Dinette Table - Representative View
NOTICE
"Representative View" indicates the quantity, lo-
cation, size & shape of equipment depicted may
vary from model to model and is subject to
change without notice. Availability may also vary.
Vista™ Owner's Manual
™
Q - 3 STAR BOARD
Star board is a high density polyethylene (plastic) and is
very durable and fade resistant. Star board requires little
maintenance, and is being used in place of wood in many
areas of the boat.
To clean star board, use a solvent-free, nonabrasive cleaner
such as hand dish washing soap or Fantastic™. Read
the label before using any cleaning product.
NOTICE
Star board will stain when exposed to certain oils
or chemicals. Always wipe up any spills immedi-
ately.
Q - 4 LAMINATED FIBERGLASS
Some models come with a cockpit table option which
consist of a laminated fiberglass material. See Figure
Q2. It can be cleaned with mild dishwashing soap and
water. Always read the label before using any product.
NOTICE
DO NOT use abrasive cleaners or solvents on
cockpit table. DO NOT use Soft Scrub™ soap
or similar cleaning products; they will scratch
the surface and remove the shine.
NOTICE
DO NOT use cockpit table as a cutting board.
The knife will leave gouges/marks in the sur-
face of the table.
Figure Q2: Cockpit Table
Section Q
Page 1